Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Sunnyvale
Gate parts and welding in Sunnyvale, TX isn’t a job for a general handyman. The town’s one-acre minimum lot zoning means most driveways run 30 to 80 feet, and the gates hanging across them are heavy: pipe-and-cable ranch gates on horse properties, ornamental iron swing gates on estate lots, long slide gates that open onto FM 151 or Collins Road. When a hinge post shifts or a weld cracks, you need a shop that understands Blackland Prairie clay and the weight of a custom-fabricated gate. Ironworks Gate Co. has been doing this work for over 42 years, and we answer the phone 24 hours a day. Call (936) 715-3043 and a live person picks up.
Most gate repairs come down to two things: the parts and the welds. Hinges wear, posts lean, rollers seize, rack teeth strip. On Sunnyvale’s expansive soil, posts set in concrete can heave up to 3 inches between wet and dry seasons. That movement twists welded steel out of square and snaps hinge welds. A fix that only straightens the panel leaves the root cause in the ground. We handle both: the metalwork above ground and the footing below it.
Why Ironworks Gate Co. Is Sunnyvale’s Preferred Gate Parts & Welding Company
Victor Salinas runs our crews, and he built this company to be the last gate contractor a homeowner ever calls. That matters in Sunnyvale, where gates are property-owner-specified rather than tract-builder standard. No two are alike. Our technicians arrive background-checked and uniformed, and they diagnose what’s actually there, not what a parts catalog assumes. We’re trained and equipped on nine automation brands including Ghost Controls, DoorKing, and Elite, so when a welded gate carries an operator, we don’t have to guess at the integration.
We serve Sunnyvale directly from our Dallas-Fort Worth dispatch office, with crews running routes through Mesquite and Forney into town. Response time to most Sunnyvale addresses runs one business day for standard parts and welding calls. Emergency service is available around the clock. A live person answers every call at (936) 715-3043, whether it’s noon or 2 a.m. No voicemail tree, no answering service, no waiting until Monday.
The Gate Parts & Welding work we do carries a written 90-Day Done Right Promise. If a hinge post shifts again or a weld fails within ninety days, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, and it applies to every job, whether it’s a $200 hinge replacement or a full custom fabrication. Sunnyvale homeowners who’ve been let down before tend to notice the difference.
Our Gate Parts & Welding Services in Sunnyvale
Hinge Replacement
On a one-acre Sunnyvale lot, a gate isn’t a light aluminum panel from a big-box store. It’s often a 14-foot ornamental iron swing gate with scrollwork, or a 16-foot pipe-and-cable ranch gate with a FAAC operator bolted to it. Hinges take the full load every time the gate cycles, and on expansive clay they take more than their share. We carry heavy-duty barrel hinges, adjustable strap hinges, and weld-on post brackets rated for the weight of a true estate or ranch gate. If the hinge post itself is moving, we’ll tell you before we cut the old hinge off, because new hinges on a leaning post won’t last a season.
Post Replacement
This is the job Sunnyvale keeps us busiest with. Blackland Prairie clay swells and shrinks, and posts set in shallow concrete footings lean with it. On the east side of town around Collins Road and Barnes Bridge Road, we regularly see hinge posts tilted 3 to 4 inches out of plumb under gates that weigh 400 pounds or more. Post replacement here means digging down past the active clay zone, setting a heavier post in a deeper pour with rebar, and welding the hinge brackets back on once the post is dead level. We don’t just straighten a post and pack dirt around it. That’s a temporary patch, and Sunnyvale soil undoes it within a year.
Rail Repair
Slide gates spanning wide Sunnyvale driveways need straight rails. A rail that’s bowed or pitted wears rollers unevenly, makes the gate grind, and eventually kills the motor. We repair and replace gate rails on all major slide gate systems, including DoorKing and Elite operators. If freeze-thaw cycles have cracked a rail weld, we cut the section out and weld in a new one rather than layering a patch over a bad joint. The gate should roll quietly, not sound like it’s dragging a chain across concrete.
Custom Welding
Sunnyvale has a lot of one-off gates: custom scrollwork, ranch pipe frames, ornamental steel to match a fence an owner had built twenty years ago. Big-box replacement parts don’t cover that. We do. Our welding crews repair cracked joints, fabricate replacement sections, build welded pickets, add gussets to undersized post brackets, and match the finish on older ironwork so the repair doesn’t announce itself. When a homeowner off East Fork Road wants an ornamental gate extended to match a fence line, we can handle that start to finish, including grinding, priming, and painting to match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunnyvale
Sunnyvale gates run on a mix of operators, and we carry parts for the brands we see most: Ghost Controls swing gate kits on ranch conversions, DoorKing slide operators on long driveways, Elite commercial-grade units on estate entrances. We stock rollers, rack sections, receiver boards, limit switches, and hinge hardware so we can complete most repairs in one visit. Mighty Mule units show up often too, usually on smaller pipe gates where the homeowner installed the kit themselves. Whatever’s on the post, our techs know it, and our parts inventory for Sunnyvale routes is set up around what’s actually installed here, not what a national warehouse ships everywhere.
Common Gate Parts & Welding Problems We See in Sunnyvale Homes
- Leaning hinge posts on expansive clay. Sunnyvale sits on the Blackland Prairie, where clay heaves and contracts with moisture. Posts set 2 feet deep tilt under gate weight. The gate binds, the operator strains, and hinge welds crack.
- Cracked welds at post brackets on heavy ornamental gates. A custom iron gate with scrollwork is often heavier than the hinge post was sized for. We see 1990s-era estate gates where the post bracket weld has almost entirely separated from the post.
- Frozen slide gate racks after ice storms. Winter ice gets into gearboxes and rack-and-pinion teeth. On a long Sunnyvale driveway, a frozen rack means the gate can’t open when you’re trying to leave for work.
- Automatic operators bolted onto manual ranch gates. On horse properties, homeowners convert pipe-and-cable gates to automatic without upgrading the operator. The motor burns out because the gate outweighs its rating by a wide margin.
Pricing for Gate Parts & Welding in Sunnyvale, TX
A typical hinge replacement on a swing gate in Sunnyvale runs $180 to $340, including the hardware and the welding labor. Post replacement runs higher, usually $450 to $900 per post, because it involves digging out the old footing, setting the new post in concrete below the active clay line, and re-welding brackets. Custom welding work like rail repairs or bracket fabrication runs $120 to $300 per hour depending on the complexity and the amount of grinding and finish work involved. Slide gate roller replacement runs $150 to $400 depending on the roller type and whether the rail needs truing. Every price is quoted and agreed before we start. Estimates are free, and for Sunnyvale customers we offer a free second opinion on any written estimate from another company.
Call (936) 715-3043 for a firm, written price on your specific gate. No one works before the number is agreed.
We Also Serve Cities Near Sunnyvale
Our crews work throughout Sunnyvale and the neighboring communities. We run regular service routes through Forney, Rowlett, Rockwall, and Sachse, so if your property sits near the county line or you’ve moved from another part of the metro, there’s a good chance you’re already on our dispatch board. Same crews, same written guarantee, same phone number: (936) 715-3043.
Serving Sunnyvale, TX - Our Local Coverage Area
We’re based in the Sunnyvale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Sunnyvale
Because the post was set in Blackland Prairie clay without a deep enough footing. Sunnyvale’s soil swells when wet and shrinks when dry, moving up to 3 inches between seasons. A post set 2 feet deep will lean again within a year. The fix is removing the post, digging a deeper hole below the active clay zone, setting a new post in concrete with rebar, and re-welding the hinges. Call (936) 715-3043 and we’ll come out and give you a straight answer and a written price.
Yes. We fabricate custom sections, pickets, scrollwork, and frames to match existing ironwork, then prime and paint to the current finish. On Sunnyvale’s custom-built estates, where gates were often specified by the original owner rather than a tract builder, a weld-and-match repair keeps the whole fence line looking original. We’ll bring samples and photos to your property and quote the work before we begin.
Often it’s both. On Sunnyvale equestrian properties, a standard residential operator gets bolted onto a pipe-and-cable gate that weighs twice what the motor is rated for. The motor burns out, and the extra torque often damages the rack or hinge welds too. We’ll assess the gate weight, replace the operator with one that’s actually rated for the load, and then weld or replace any hardware the strain damaged. Call (936) 715-3043 for a free assessment.
Yes. We replace rollers, bearings, and rail sections on slide gates, including DoorKing and Elite systems. On driveways that run 50 feet or more, a worn roller makes the gate track wrong and puts a heavy load on the motor. We’ll true the rail, set the new rollers to the right height, and make sure the gate rolls without dragging. Estimates are free.
Usually, yes. Sagging comes from the hinge post leaning, the hinges themselves bending or cracking, or a weld failing at the post bracket. On one Sunnyvale job off Collins Road, our crew pulled a 16-foot pipe-and-cable swing gate that had sagged nearly 2 inches at the latch side. The hinge post had shifted in the clay and the original welds were cracked. We cut the old hinges off, reset the post in a deeper concrete footing with rebar, welded new heavy-duty barrel hinges at three points, and re-hung the gate so the FAAC operator no longer strains against a misaligned rack. The panel itself never needed replacing. Call (936) 715-3043 and we’ll tell you honestly whether your gate can be saved or whether the panel is too far gone.
If your gate is leaning, grinding, or failing at a weld in Sunnyvale, call us at (936) 715-3043. A live person answers around the clock, the estimate is free, and the price is agreed before any work starts. Ironworks Gate Co. stands behind every weld with the written 90-Day Done Right Promise. That’s a square deal, and it’s been our way for over 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Sunnyvale, TX.