Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Colleyville?
For most residential gate welding and parts replacement in Colleyville, homeowners typically spend between $250 and $850, depending on the complexity of the repair and the specific materials involved. Simple hinge welding or bracket reinforcement usually falls on the lower end of that range, while motor gear replacement or structural gate repair typically sits at the higher end. At Ironworks Gate Co., we provide upfront pricing before we turn a single bolt, so you know exactly what the cost will be before we begin.
When your gate stops working, it is rarely just a matter of a broken part. It is often a symptom of the ground shifting, extreme Texas weather, or wear on the automation system. We specialize in diagnosing these issues correctly the first time. If you need an honest assessment, call us at (817) 242-5426 for a free estimate.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for gate work is rarely a flat fee because every driveway and every gate setup is unique. However, we have compiled the following price ranges based on our work in the Colleyville area to give you a clear expectation of what to budget for these common repairs.
| Service Type | Estimated Cost Range |
|---|---|
| Minor Welding Repair (Hinges, Brackets) | $250 – $450 |
| Gate Alignment & Structural Adjustment | $350 – $600 |
| Gate Motor Gear or Belt Replacement | $400 – $850 |
| Access Control / Keypad Repair | $300 – $650 |
| Complete Hinge Rebuild or Reinforcement | $500 – $950+ |
Please note that these ranges cover labor and standard parts for the nine brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate requires custom fabrication or specialized steel components that are not readily available, we will discuss that with you upfront. We believe in a square deal: an upfront price with no surprises on the bill. For an exact quote on your specific gate, please call (817) 242-5426.
What Affects Gate Parts & Welding Pricing in Colleyville
Many factors influence the final cost of a gate repair. Understanding these helps you see why a repair might cost more or less than a neighbor’s project. We want you to understand the work we are doing at your home.
- Soil Movement and Foundation: Colleyville is known for its clay-heavy soil, which expands and contracts significantly with our weather patterns. This soil movement causes gate posts to shift, which puts immense pressure on welds and hinges. If your gate is dragging, we often have to address the post foundation or realign the entire structure, not just weld the hinge.
- Material Type: Welding wrought iron requires different techniques and heat settings than working with aluminum or steel tubing. Older, heavy wrought iron gates often require more labor-intensive prep work to remove layers of old paint or rust before a solid, lasting weld can be made.
- Gate Weight and Size: A standard residential gate is one thing, but a heavy, custom estate gate requires specialized equipment to lift and hold in place during repair. The heavier the gate, the more complex the welding and alignment process becomes to ensure it operates smoothly after we leave.
- Accessibility of the Components: Sometimes, the gate motor or the hinges are tucked into tight areas or buried under landscaping. The time it takes us to safely access these parts safely affects labor costs. We always aim to work efficiently, but we never cut corners on access if it compromises the quality of the repair.
- Automation Brand Complexity: We are trained and equipped to service nine specific brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Some of these systems have proprietary parts that are more expensive to source than others. Knowing exactly which brand you have allows us to bring the correct parts on the first visit.
The Importance of Professional Welding
When a gate hinge snaps or a support bar cracks, the temptation to have a general handyman apply a quick tack weld is high. We strongly advise against this. A gate is a heavy, moving object that poses a significant safety risk if it is not secured properly. A professional weld is not just about sticking metal together; it is about structural integrity.
At Ironworks Gate Co., we approach every weld with the precision of a blacksmith. We clean the area, bevel the edges if necessary, and use the correct filler material to ensure the joint is stronger than the original metal. If a weld is done incorrectly, the gate can sag, put undue strain on your motor, or eventually fail again in a few months. We stand behind our work with our 90-Day Done Right Promise. If we weld it, it stays welded. We are the company that makes a 40-year-old gate close like the day it was hung.
How to Save on Gate Parts & Welding
We know that unexpected repairs are never convenient. While we do not cut corners, we do offer ways to help manage the cost of keeping your gate in good working order.
- Take Advantage of Standing Offers: We offer $50 Off Any Repair Over $250. Be sure to mention this offer when you call our office.
- Senior and Veteran Discount: We provide a permanent 5% discount for our senior and veteran customers as a token of our appreciation.
- Seasonal Tune-Ups: An $89 Seasonal Tune-Up can identify small issues, like a loose hinge or a motor belt starting to fray, before they turn into expensive, large-scale repairs. Catching a problem early is the best way to save money.
- Get a Second Opinion: If you have received a quote from another company that seems high or confusing, take advantage of our Free Second Opinion on Any Written Estimate. We will look at the work required and give you our honest assessment.
If you are ready to get your gate back in working order, call (817) 242-5426. A live person answers our phone 24 hours a day, 7 days a week. We do not use voicemail trees or callback queues. We will get you on the schedule and provide a clear, upfront estimate for the work.
Common Signs You Need Gate Repair
Most homeowners call us when their gate stops opening or closing entirely. However, there are usually signs that appear long before the gate fails completely. Keeping an eye on these can save you from being stuck outside your driveway in the rain.
- The Gate Drags on the Driveway: This is a classic sign of hinge wear or post-shifting. If you see a scrape mark on your concrete, the gate is putting unnecessary stress on the motor and the hinges. It needs alignment immediately.
- Strange Noises: A gate should operate with a steady, consistent hum. If you hear grinding, squealing, or popping sounds, it is usually a sign of metal-on-metal wear or a failing motor gear.
- The Gate Moves Slower Than Usual: If your gate seems to be struggling or moving significantly slower than it did last month, the motor is likely working harder than it should. This can lead to a burnt-out motor if ignored.
- Visible Rust or Cracked Welds: If you can see the metal flaking away or a hairline crack where the hinge meets the post, the structure is compromised. Do not wait for it to collapse.
If you notice any of these, call us at (817) 242-5426. We would rather fix a small hinge weld today than replace a gate motor or a structural post tomorrow.
FAQs - Gate Parts & Welding Cost
Is it cheaper to repair or replace my gate?
In most cases, repairing your existing gate is significantly cheaper than replacing it, provided the core structure is sound. We see many gates that are 20 or 30 years old that just need a new hinge, a fresh weld, or a motor gear replacement to run like new again. If we determine that a repair is not a long-term solution, we will tell you honestly, but we find that most of the time, a professional repair is the best path forward.
How much does a gate motor repair cost in Colleyville?
Gate motor repairs typically range from $400 to $850, depending on the brand and the specific part that failed. We are trained on nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which allows us to source the exact parts needed to get your motor running again without replacing the entire unit.
Can you fix my gate today?
We strive to complete most jobs in a single visit. Because we are a local company serving Colleyville with a team of background-checked, uniformed technicians, we carry the parts we need to handle most common repairs right on our trucks. Call us at (817) 242-5426 to check our availability for today.
Do you offer free estimates for welding?
Yes, we offer free estimates for all our gate services. We believe in transparency, so we will come out, assess the damage, and give you an upfront price before any work begins. There are no surprises on the bill when you work with us.
What if the repair doesn’t hold?
Every job we complete is protected by our 90-Day Done Right Promise. This is a written, no-hassle guarantee with no paperwork and no arguing. If the repair is not right, we come back and make it right, every time, on every job. We are the company that plans to be in town for another forty years.
Safety and Professional Expertise
We want to be clear about safety. Gate systems involve high-voltage electricity and, in some cases, high-tension springs. These components are dangerous if handled without the proper training and equipment. Never attempt to weld a gate while it is still under tension or attempt to open a motor casing if you are not trained in electrical safety. We have been in business since 1984, and we have seen the results of well-intentioned DIY attempts gone wrong. Please let a trained professional handle the welding and electrical work. Your safety, and the safety of your family, is our priority.
When you call Ironworks Gate Co., you are getting a team that follows the K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job we do gets the same level of care as the first one. We are the dedicated gate specialists for homeowners who want the job done right and never want to think about it again. We are not the lowest bid, but we are the last call you will ever need to make.
For expert Gate Parts & Welding in Colleyville, you can rely on our experience and our promise to do the job right. We invite you to visit our home page to learn more about our full range of services. When you are ready for a professional, square deal, call (817) 242-5426.
Pricing reflects the Colleyville market as of 2026. Ironworks Gate Co. offers free estimates - call (817) 242-5426. Written by Victor Salinas, Owner at Ironworks Gate Co., serving Colleyville since 1984.
What Our Customers Say
"The hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a new gate, which two other companies had pushed for."
- Megan Whitaker"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one on the truck, and we were moving cars again inside an hour."
- Chris Gallagher