Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.





Fast, Reliable Gate Repair Across Lavon
Gate repair in Lavon almost always starts underground, in the black clay that shifts under post footings from one wet season to the next. Most gates we repair in the 75166 ZIP need the post re-plumbed before any hinge, latch, or operator work will hold. We are Ironworks Gate Co., and we have been repairing driveway and estate gates for over 42 years. Our crews dispatch to Lavon from our Dallas-Fort Worth office, and a live person answers the phone whenever you call (936) 715-3043, day or night. When your gate will not close or a post has leaned out of square, we will be there when we say.
Why Ironworks Gate Co. Is Lavon’s Preferred Gate Repair Company
Lavon homeowners do not call us looking for the cheapest fix. They call because the gate worked fine for a few years, then one morning the latch would not catch or the opener started reversing before the leaf closed. That pattern is not random, and it is not your fault. Lavon’s newer subdivisions were mass-graded on raw black clay, and that clay moves. We know that every repair in this city has to account for the soil before we touch a hinge or a motor.
Our technicians are background-checked and uniformed, and they work the way they would in their own mother’s driveway. We service nine gate-automation brands, including Ghost Controls, DoorKing, and Mighty Mule, so the fix is made correctly on the first visit, whatever is bolted to your post. And every job we complete is covered by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing. That is the Keystone Standard.
When you call, a live person answers. Not a voicemail tree. Not an answering service. If your gate is stuck open at 11 p.m. and you want a human to talk to, you will get one at (936) 715-3043.
Our Gate Repair Services in Lavon
This is the full scope of what we do: Gate Repair from hinges and welds to keypads and automation. For Lavon specifically, four services cover the majority of what we see. Here is what they mean for your gate.
Hinge & Post Repair
This is the foundational repair in Lavon. When a post footing is set into unamended black clay, the clay heaves after a wet spring and shrinks during a dry stretch. That motion torques the hinge post out of plumb, the gate leaf sags, and the latch no longer lines up. We dig out the footing, reset the post in fresh concrete, and only then address the hardware. Tightening a hinge on a leaning post buys you weeks, not years.

Electric Gate Repair
Many Lavon automatic gates were wired during the construction boom without proper conduit runs for future safety photocells. When those systems fail or need entrapment protection retrofitted, the repair often requires trenching and splicing the original installer never planned for. We handle the full electrical side: motors, limit switches, photo eyes, keypads, and the low-voltage wiring in between. Done right, and backed in writing.

Gate Realignment
When a gate leaf drops or drifts so the latch misses the catch, the cause in Lavon is rarely the gate itself. It is the post underneath. We re-plumb the post, re-hang the leaf, and set the hinges so the gate swings true and meets the latch without straining. Then we check the operator limits against the new travel. A realigned gate closes quietly instead of slamming or reversing.

Automatic Gate Repair
Builder-grade operators installed between roughly 2015 and now have all hit first-failure age at the same time across Lavon. Motor burnouts, stripped rack and pinion gears, and control boards that no longer read limits are common. We service Gate Repair on nine major opener brands, and most jobs are completed in a single visit with the price settled before a single bolt is turned.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lavon
Whatever is on your driveway, our technicians are trained and equipped for it. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In practice, Lavon’s newer subdivisions skew toward builder-installed LiftMaster and Mighty Mule operators, with Ghost Controls showing up on higher-end automated driveway gates. We keep common parts on hand for those lines so most repairs do not stall waiting on a shipment. And if you have a written estimate from another company, we will give you a free second opinion on it.
Common Gate Repair Problems We See in Lavon Homes
- Leaning hinge posts from black clay movement. The defining repair pattern in the 75166 ZIP. When the clay heaves or shrinks, the post moves, the leaf sags, and the latch misses. The fix starts underground, with the footing.
- Builder-grade operators failing on the same timeline. Gates installed during Lavon’s boom years are reaching first-failure age together. We see motor burnouts, stripped gears, and dead control boards across entire subdivisions in the same season.
- Missing conduit for safety photocells. Many automatic gates were wired without the conduit runs that entrapment protection requires. Adding photo eyes later means trenching, and we handle that start to finish.
- Hinges rusted by lake humidity. Lavon sits next to Lake Lavon reservoir, and that slightly elevated humidity shows up on steel hinges and wrought iron frames faster than in drier parts of Collin County.
Pricing for Gate Repair in Lavon, TX
Here are honest numbers for the Lavon market. A hinge and post repair, including digging out and resetting one post in new concrete, typically runs $350 to $650 depending on post size and access. A gate realignment job, where we re-hang the leaf and adjust the latch, generally falls between $150 and $400. Electric gate repair on a builder-grade operator starts around $200 for diagnostics and minor component replacement, with full motor or control board swaps running $450 to $1,100. Automatic gate repair involving trenching for photocell retrofit add-ons typically starts at $800 and goes up based on the length of the run. Every job is quoted and agreed in writing before we start. A square deal, upfront price, no surprises on the bill. We offer $50 off any repair over $250, a $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (936) 715-3043 for a free estimate.
We Also Serve Cities Near Lavon
When your gate is down and the post is leaning, you want a crew that knows the soil, not just the hardware. Our Gate Repair in Lavon service covers the city itself, and we regularly work gates in Royse City, Fate, Rockwall, and Sachse for homeowners who want the same 90-Day Done Right Promise applied to their driveway.
Serving Lavon, TX - Our Local Coverage Area
We’re based in the Lavon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lavon
Because the post is moving at the footing, not at the hinges. Lavon’s subdivisions sit on expansive black clay that heaves during wet spells and shrinks in dry heat, and that cycle torques posts out of plumb seasonally. Tightening hinge bolts on a moving post will not stop the lean. The post needs to be dug out and reset in new concrete, then the gate leaf re-hung. Call (936) 715-3043 and we will take a look at the footing before you spend more time on the hardware.
Yes, and we see it all over the city. The operator is reading resistance from a gate leaf that is binding because the hinge post has shifted out of plumb. The motor’s limits no longer match the physical travel of the gate, so it reverses thinking something is in the way. In Lavon, the root cause is almost always the clay under the post, not the motor itself. We reset the post, realign the leaf, and recalibrate the limits. For most homes that resolves the reversing for good. Call (936) 715-3043 for an exact quote, estimates are free.
The post has leaned, and the gate leaf dropped with it. A quarter-inch of post movement at the ground becomes a half-inch or more of misalignment at the latch. The gate does not need to look visibly bent for the catch to miss. We fix this by re-plumbing the post and re-hanging the leaf so the latch lines up cleanly again. If you want a second opinion before paying for a repair, our free second opinion offer applies to any written estimate you have.
Yes, and this is one of the more common jobs we do in Lavon’s newer sections. Many homes were built with a solid manual gate and the conduit for automation was never installed. We trench a clean, narrow run for the low-voltage power and safety photocell wiring, then backfill and restore the area as close to original as possible. You get full automation without a mess across the yard. Call (936) 715-3043 and we will walk you through the scope and the written price before any work begins.
Because the streets in Lavon’s master-planned subdivisions were mass-graded on the same raw black clay, and the builder-grade hardware went in at roughly the same time during the construction boom. The soil cycles on a shared seasonal clock, and the operators all reached first-failure age on the same timeline. When one gate on your block starts sagging or reversing, its neighbors are usually weeks away. That is why almost every repair in 75166 starts with the post, and then the hardware. Call (936) 715-3043 and we will diagnose yours before it strands you.
Call Ironworks Gate Co. for Gate Repair in Lavon
A leaning post, a gate that will not latch, an opener that reverses for no reason you can see. These are the calls we handle every week across Lavon’s subdivisions, and we have been doing this work for over 42 years, founded in 1984. A live person answers the phone 24 hours a day, 7 days a week at (936) 715-3043. Tell us what the gate is doing and where you are in Lavon, and we will give you a straight answer and a free estimate. The work is quoted before we start, covered in writing by the 90-Day Done Right Promise, and done so you never have to think about it again.
Written by Victor Salinas, Owner at Ironworks Gate Co.
Before
After
Before
After
Before
After