Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Greenville
Gate parts and welding in Greenville usually comes down to one thing: keeping a wide, heavy gate square and rolling on soil that never stops moving. We repair and replace hinges, posts, rails, rollers, latches, and we weld what’s broken. Most Greenville jobs are handled in a single visit by a background-checked, uniformed technician who carries the steel, brackets, and hardware to do the work on the spot. If your gate is sagging, dragging, or hanging by one hinge, call (936) 715-3043 and talk to a live person, day or night.
Why Ironworks Gate Co. Is Greenville’s Preferred Gate Parts & Welding Company
We’ve spent 42 years learning what heavy gates do when they’re hung on Blackland Prairie clay. That matters here more than most places. Greenville sits at the eastern edge of the Blackland Prairie, where the deep black clay swells with spring rain and cracks open in August. Posts move. Hinges bind. Welds pull apart. A gate company from the sandy-soil suburbs west of Dallas doesn’t see this the way we do, because their ground doesn’t fight back the way yours does.
Customer word travels in Hunt County, and the reputation we’ve built in Greenville is simple: we show up, we quote the job before work begins, and we stand behind it in writing with our 90-Day Done Right Promise. Every job. No paperwork hassles, no arguing. If it isn’t right, we come back and make it right. Victor Salinas, our owner, set that standard 42 years ago and it hasn’t moved since.
When a gate off Wesley Street or out near the Hunt County Fairgrounds won’t close, you don’t want to wait until Monday. We coordinate from our DFW office, and our crews serve Greenville locally. A live person answers our phone 24 hours a day, 7 days a week. That’s not a claim, it’s how we run.
Our Gate Parts & Welding Services in Greenville
This is the work we do most often for Greenville homeowners and acreage property owners. Every one of these begins with a straight answer about what’s wrong and what it costs to fix, before a single bolt is turned.
Hinge Replacement
Hinges are the first thing to fail on a Greenville gate, and the reason is usually the soil, not the steel. As clay expands and contracts, gate posts rotate slightly. That rotation transfers load to the hinge pins, which bend or snap. Heavy ornamental iron gates on older homes near downtown Greenville wear through barrel hinges the same way farm tube-steel gates do on FM roads. We cut out the old hinge, weld in a properly sized replacement, and re-set the post plumb before re-hanging.
Post Replacement
When hinge or latch posts heave too far, re-hanging the gate buys a few months at best. The real fix is digging out the old footing, setting a new post deep enough to survive Greenville’s clay cycle, and welding the hinges back on square. On acreage gates, where the posts are often 6×6 steel or 4-inch schedule 40 pipe, we match the new post to the existing gate frame so it doesn’t look patched.
Rail Repair
Rails take a beating on long gate spans. A 16-foot or 20-foot gate has enormous leverage at the middle. When a hinge binds, the rail twists. When a fork truck or a skid steer clips the gate, the top rail bends or cracks at a weld. We straighten, sleeve, or re-weld the rail, and we’ll usually add a gusset at the stress point so the same failure doesn’t come back next season.
Custom Welding
Some Greenville gates were never meant to be gates. They’re old agricultural tube-steel frames from a cattle operation, now guarding a driveway that gets opened and closed a dozen times a day. We fabricate mounting plates, hinge tabs, operator brackets, and latch strikes in the field so modern hardware fits old steel. We’ve welded adapters so a LiftMaster swing operator can mount onto a farm gate built when Eisenhower was president. If it’s steel and it’s on your gate, we can fix it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Greenville
Our technicians are trained and equipped on nine major gate automation brands, including Ghost Controls, DoorKing, and Elite. That means when your opener quits, we don’t guess and we don’t order parts twice. The correct fix happens on the first visit, whatever is mounted on your driveway. For Greenville customers who need a replacement part, our crews commonly carry common hinge barrels, rollers, and operator brackets on the truck, which saves a second trip.
Common Gate Parts & Welding Problems We See in Greenville Homes
- Clay heave throws posts off-plumb. Spring rains soak the clay, it swells, and a hinge post that was square in October can be 2 to 3 inches out by May. The gate drags, the latch misses, and the welds at the post start to crack. This is the single most common reason we re-set and re-weld gate posts on Greenville acreage.
- Ice storms bend and twist wide farm gates. February 2021 is the example every Hunt County homeowner remembers. Ice load on a 16-foot swing gate is enormous. Top hinge pins bend, post welds tear, and the gate freezes into the driveway. Mobile welding is often the only way to get the entrance open again.
- Old agricultural gates retrofitted with openers fail at the footing. A galvanized tube-steel farm gate was built to be opened by hand, twice a day. Add a Ghost Controls or DoorKing opener and now it cycles daily, hundreds of pounds of steel moving at motor speed. The original post footing was never sized for that. We see the result here regularly: a snapped hinge pin or a broke weld right at the post.
- Gate rollers bind on Hunt County clay. Sliding gates that run on V-track rollers grind through bearings when clay grit and dust work their way into the wheels. The gate starts jerking, then the chain or belt overloads the motor. Cleaning and replacing rollers beats replacing a burned-out operator every time.
Pricing for Gate Parts & Welding in Greenville, TX
A typical hinge replacement in Greenville runs $180 to $340 per hinge, depending on gate size and whether the post needs re-plumbing. Post replacement runs $450 to $950 per post, counting excavation, concrete, and welding. Rail repair or re-welding a cracked joint usually lands between $200 and $500. Custom welding runs $95 to $150 per hour plus steel, so a fabricated operator bracket or an adapter plate for a farm gate typically costs $250 to $600. Gate roller replacement averages $180 to $320 per side. These are Greenville market rates, quoted and agreed before any work starts. You get the number first, then the job. Call (936) 715-3043 for a free estimate.
Key takeaways for Greenville homeowners:
- Blackland Prairie clay moves posts seasonally; fixing the post, not just the hinge, is often required.
- Prices are quoted and agreed before work begins; no surprises on the bill.
- Most parts and welding repairs are completed in one visit.
- Every job carries a written 90-Day Done Right Promise.
- $50 off any repair over $250, plus a permanent 5% discount for seniors and veterans.
We Also Serve Cities Near Greenville
If your property is outside Greenville proper, we run the same local crews to Quinlan, Royse City, Lavon, and Fate. Same pricing, same 24-hour live phone, same written promise. Our Gate Parts & Welding team works the whole Hunt County corridor, and we understand what the clay does to a gate no matter which side of the county line you’re on.
Serving Greenville, TX - Our Local Coverage Area
We’re based in the Greenville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Greenville
Because the post is moving, not the gate. Greenville’s Blackland Prairie clay shrinks and swells with moisture, and a gate post set in a shallow footing can shift 2 to 3 inches out of plumb in one year. Re-hanging the gate level only works until the next rain cycle. The permanent fix is re-setting the post deeper than the active clay zone, or re-plating and re-welding the hinge post so it stays square. Call (936) 715-3043 and we’ll tell you exactly what your post needs.
Yes, and we do it regularly on Greenville acreage properties. The old galvanized frames were never engineered for operator mounting, so we fabricate adapter brackets and weld them to the gate frame in the field. The operator gets a solid mount, the existing gate stays in service, and the whole job is covered by our 90-Day Done Right Promise. Call for a free estimate at (936) 715-3043.
Clean track, good rollers, and a solid post. Hunt County clay produces fine, hard grit that chews roller bearings and fills the V-track. We replace worn rollers with heavier sealed-bearing units and make sure the track is clear and graded so water and silt don’t pool. On gates that have run for years on original hardware, replacing rollers and chain before the motor overloads is the cheapest fix there is.
The hinge pin, the post weld, or the operator’s internal gear. Ice loading forces the gate to fight the opener, and something has to give. We’ve seen top hinge pins sheared clean, weld joints torn at the post, and gearboxes stripped because the operator tried to force a frozen gate. The first step is a visual check of the hinges and welds, then a test of the operator under load. Call (936) 715-3043 and we’ll walk you through it or send a truck.
Yes. Photo-eyes, or safety edges, are what keep a closing gate from hitting a car, a child, or a dog. On solar-powered rural gates we’ve seen around Greenville, photo-eyes are sometimes skipped because they add a small current draw, but the risk is not worth the savings. A properly sized solar panel and battery pair handles photo-eyes fine. We install them on every automated gate we service or repair.
Call Ironworks Gate Co. for Gate Parts & Welding in Greenville
If your gate is sagging, dragging, welded-broke, or fitted with old farm hardware that was never meant for daily use, call us. We serve Greenville with technicians who know what Hunt County clay does to steel. The price is quoted before we touch a bolt. The work is done right and backed by our written 90-Day Done Right Promise. $50 off any repair over $250. Free second opinion on any written estimate. A live person answers the phone 24 hours a day. Call (936) 715-3043 now.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Greenville since 1984.